Welcome to Snowsports1.com

Business Hours:
Mon. - Fri. 8am-10pm
Sat. 10am-3pm

Daytime Phone
765-452-8443

Toll Free
1-866-881-5502

Evenings & Weekends Phone
Tel: 765-453-9116
Fax: 765-452-9878

Product Catalog

See our Latest Catalog from Kimpex

Weather

Get the lastest snow reports from Show Me The Snow

Services

Snowmobile Apparel for men, women and children

http://www.kimpex.com/public/servlet/CatalogPortal?flag_locale=en-US&locale_catalog_id=1014

CKX Helmets, Gloves and boots, CKX and Rhyno Jackets, Bibs, and much more. Visit our product catalog page for a complete line of products. 10% OFF all apparel

Snowmobile Parts

Electrical Systems, Exhaust, Drive System, Clutches, Brakes and Cables, Windshilds, Carburation, Steering and Skis, Engine Components, Drive Belts, Rewind Starters, Covers

Snowmobile Accessories

Windshield Bags, Luggage, Saddlebags, and Backrest Bags, Belly Pans, Seat Covers, Mirrors, Shop Dolly and much more

Snowmobile and ATV repair

Preseason inspections, engine rebuilding, suspensions, for all makes and models

Enclosed trailer interiors

Carpet, ramping, cabinets, 110ac, call Josh Hall for quote 765-864-1688

portable shelving

portable shelving

rubber mat recessed in ramp doors

rubber mat recessed in ramp doors

Trip Consulting

jrsarber@indiana.edu

http://woodlandsrestaurant.tripod.com/index2.htm

E-mail John Sarber

Photos

Photos 1

Photos 2

Photos 3

Photos 4

Specials

Snowmobile Parts / 10% OFF

Electrical Systems, Exhaust, Drive System, Clutches, Brakes and Cables, Windshilds, Carburation, Steering and Skis, Engine Components, Drive Belts, Rewind Starters, Covers, Visit our Product catalog page for a complete line of products. CALL OR E-MAIL FOR CURRENT PRICING. 10% off all list prices.

Snowmobile Trailer Accessories / 10% OFF

Stormfront Shields, Stud Matts, Ski Sliders, trailer hitches, tie downs, brake controllers and much more. Visit our Product catalog page for a complete line of products. CALL OR E-MAIL FOR CURRENT PRICING 10% off all list prices

USI Skis / PX-301

Super aggressive deep keel ski for the all out high performance rider Race or Trail.

Unique V-tunnel design for the best in penetration and directional control with no loss of tracking and steering control.

Ideal mountain ski for floatation in powder snow, ease of steering control, and great side hill riding.

All new super flex rubber handle linkage allows free movement and maximum ski tip flex for the harshest of conditions virtually eliminating ski tip bump feed back through the handle bars.

PX 301 skis all use new designed PX Series wear bars available in 4,6 inch and 9 inch carbide lengths.
(Wear bars are ordered separately.)

301 series skis all use our exclusive aluminum powder coated mount shoes for lightweight and durability. They will not fatigue or twist like other cheap metal and plastic mount designs will. (Order mount shoes separately)

The material used in all USI skis is Tivar UHMWPE plastic for the absolute best in performance durability, flexibility, and wear resistance.

Fasteners are stainless steel for the best in corrosion resistance and durability.

PX-301 AVAILABLE IN: BLACK, DARK BLUE, ARTIC GREEN, BRIGHT RED AND YELLOW

High Performance Mount Kits

Lightweight and flat to give any USI ski the maximum in corner carving aggressiveness. Recommended for only the most aggressive high performance rider.

Features the same unique 3-position mount hole system used on our VX-301 series mount shoes for the ultimate in rider control to fit his or her riding style.

Super light weight at 1.8 lbs. per mount shoe.

The PX-301 series high performance mount shoes are CNC milled from T5 aluminum extrusion channel and satin anodized for surface durability, corrosion resistance and the ultimate in quality of appearance.

T5 HIGH PERFORMANCE MOUNT ALSO AVAILABLE IN GOLD ANODIZED

*PX-301 W/T5 HIGH PERFORMANCE MOUNTS AND 9" CARBIDE WEAR RODS   $404.00

*PX-301 W/T5 HIGH PERFORMANCE MOUNTS AND 6" CARBIDE WEAR RODS   $396.00

*PX301 W/T5 HIGH PERFORMANCE MOUNTS AND 4" CARBIDE WEAR RODS   $388.00

"FREE SHIPPING"EXPIRES 12/31/2002

301 Ski Mount Kits

The performance mount kit with an adjustable spindle mount the VX aluminum casting allows the rider to position the ski for his or her riding style. POSITION 1 provides the best tracking and stability with very predictable steering characteristics. POSITION 2 is the designed center location point of the ski. This location is the designers choice for best control at speed with light steering feel. POSITION 3 is the advanced riders position. Steering will be quick and light. Tracking will not be as good as 1 & 2. Special attention should be given to ski alignment and castor-camber setting

CAST ALUMINUM MOUNT ALSO AVAILABLE IN BLACK

*PX-301 W/ALUMINUM MOUNT AND 9" CARBIDE WEAR RODS $383.00

*PX-301 W/ALUMINUM MOUNT AND 6" CARBIDE WEAR RODS $375.00

*PX-301 W/ALUMINUM MOUNT AND 4" CARBIDE WEAR RODS $367.00

"FREE SHIPPING"EXPIRES 12/31/2002

USI Skis / Asphalt Racing Ski Kit

Asphalt Racing Ski Kit Here you will find the fastest and safeest set of Asphalt Racing Skis available. The asphalt wheels are 4\" in diameter by 2\" wide, 90 durometer hard neoprene. This provides an excellent load bearing wheel base with 1400 pounds combined load per ski (700 pounds/wheel). Each wheel has dual bearings capable of over 16,000 RPMs (130 MPH = 11,500 RPM), This is for the person that just can\'t bear putting that snowmobile away after the winter snowmobiling season is over and says, \"LET\'S GO RACING!\" Contains two completely assembled skis. Driling of spindle set-up required. CALL OR E-MAIL FOR CURRENT PRICING

USI Skis / Flatline Racing Ski Kit

Flatline Racing Ski Kit Used on snow, ice or grass these skis reduce friction with their teflon-like surface. In addition to less drag, you have superior impact and vibration resistance. Contains two ski bottoms, two 3\" wide aluminum shoes, two plastic handles and all hardware. ASSEMBLY REQUIRED. CALL OR E-MAIL FOR CURRENT PRICING

USI Skis / Mini Sled Ski Kit

Mini Sled Ski Kit Plastic performance skis for the little guys and gals who want to add a little style and performance handling to their sleds too! These skis are patterned after the USI Flatline Racing Skis used on the most powerful race sleds. Definitely safe enough for the power that the mini sleds put out around the Snow Cross track or bustin\' over the moguls just for fun. So don\'t settle for toy skis when you can get real ones! CALL OR E-MAIL FOR CURRENT PRICING

USI Skis / VX-301 Ski Kit

THE PREFERRED SKI BY TOP SNOW CROSS RACERS. The VX-301 ski is the most advanced ski design available to date. The unique V-Tunnel design shape of the keel gives it great penetration for aggressive directional control with out sacrificing tracking and ease of steering control. Landing off of jumps will be solid and positive without the darting of currently produced skis from the O.E.M. and aftermarket alike. So if your looking for the state of the art in all around performance ski for all conditions, take a hard look at the all new VX-301 skis. 6.5" wide and 42" length

VX-301 AVAILABLE IN: BLACK, PURPLE, DARK BLUE, GREEN, BRIGHT RED, YELLOW, DARK RED

High Performance Mount Kits

Lightweight and flat to give any USI ski the maximum in corner carving aggressiveness. Recommended for only the most aggressive high performance rider.
Features the same unique 3-position mount hole system used on our VX-301 series mount shoes for the ultimate in rider control to fit his or her riding style.
Super light weight at 1.8 lbs. per mount shoe.

T5 HIGH PERFORMANCE MOUNT ALSO AVAILABLE IN GOLD ANODIZED

*VX-301 W/T5 HIGH PERFORMANCE MOUNTS AND 9" CARBIDE WEAR RODS   $404.00

*VX-301 W/T5 HIGH PERFORMANCE MOUNTS AND 6" CARBIDE WEAR RODS   $396.00

*VX301 W/T5 HIGH PERFORMANCE MOUNTS AND 4" CARBIDE WEAR RODS   $388.00

"FREE SHIPPING"EXPIRES 12/31/2002

301 Ski Mount Kits

The performance mount kit with an adjustable spindle mount the VX aluminum casting allows the rider to position the ski for his or her riding style. POSITION 1 provides the best tracking and stability with very predictable steering characteristics. POSITION 2 is the designed center location point of the ski. This location is the designers choice for best control at speed with light steering feel. POSITION 3 is the advanced riders position. Steering will be quick and light. Tracking will not be as good as 1 & 2. Special attention should be given to ski alignment and castor-camber setting

CAST ALUMINUM MOUNT ALSO AVAILABLE IN BLACK

*VX-301 W/ALUMINUM MOUNTS AND 9" CARBIDE WEAR RODS   $383.00

*VX-301 W/ALUMINUM MOUNTS AND 6" CARBIDE WEAR RODS   $375.00

*VX-301 W/ALUMINUM MOUNTS AND 4" CARBIDE WEAR RODS   $367.00

"FREE SHIPPING"EXPIRES 12/31/2002

X-Force, X-Trail, Sherpaw Snowmobile Tracks

Designed for the extreme riding. Our 1" x design on the center section gives maximum acceleration and braking traction. The side angle traction gives better handling in curves

1.00" to .750 x (2.52" x 48 pitch) 121" x 15"w
$ 395.95

E-mail for application

V Force 3 Reeds

Introducing the new VForce 3, by Moto Tassinari. For the VForce 3, Moto Tassinari has continued to build upon their industry leading design that doubles the reed tip surface of a standard reed valve. The advantages of doubling the reed tip surface are numerous. On a VForce, with it’s less restrictive design, the reed petals only travel half the distance of a standard valve resulting in greater airflow through the entire RPM range and increasing reed petal life. Throttle response and horsepower is greatly increased with the addition of a VForce, however fuel economy is typically also greater, due to the efficiency of a VForce reed valve system. Exclusive to the VForce 3 is our patent pending snap together cage design that utilizes symmetrical reed petals, eliminating the need for different “inner” and “outer” replacement petals. Also new is the patent pending reed tip shape that accelerates the air mixture over the reed tips, ensuring increased airflow for increased horsepower. The new design completely eliminates the need for screws, so when you do need to finally replace your worn reeds the job is literally… a SNAP

Polaris

Twins w/reeds - all years $245

Triples w/reeds - all years $325

Arctic Cat

All triples $325

ZR 440/500/600 & ZL 500/600 $245

ZR/ZL 800 & F5/F7 $245

Ski-Doo

Mach 1 700/Mach Z 800 97-02 $325

Form III 600/700/800 96-02 $325

Grand Touring 700 97-02 $325

MXZ /500/600 99-02 $245

MXZ 700/800 All $299

600 HO/800 (REV) $299

Yamaha

V-Max 500/600 97-02 $245

Phazer 488 - all years $245

600/700 triples - all years $330

V-Max 800 - all years
$425

V-Force Delta 3 Reeds Typical Dyno Results (gains) after Installation:

Arctic Cat Ski-Doo

      ZR 440 3-4 hp MID 2-3 hp TOP       Formula III 600 5-6 hp LOW 5-6 hp MID

      ZL / ZR 500 4-6 hp MID       700 Mach I 8-9 hp LOW 7-8 hp MID

      ZR 600 3-4 hp MID       800 Mach Z 6-7 hp LOW 4-5 hp MID

      ZR 800 3-4 hp MID       MXZ 700 & 800 4-5 hp LOW 4-5 hp MID

      ZRT 600 4-5 hp MID 3-4 hp TOP Yamaha

      1050 Kit 7-8 hp MID 6-7 hp TOP       V-Max 600

Polaris       V-Max SX 700 4-5 hp LOW 3-4 hp MID

      XCR 600 4-5 hp MID 4-5 hp TOP       V-Max SRX 700

      XC 700 7-8 hp MID 5-6 hp TOP

      Storm 800 7-8 hp MID 6-7 hp TOP
E-MAIL SNOWSPORTS

Vantage, Vantage II, Vantage III Snowmobile tracks

The VANTAGE track is a direct replacement for original tracks. No modifications needed.Designed for the snowmobiler who wants the safety and traction of a studded track but is uncomfortable with drilling or burning holes for studding.

.750" x (2.52" x 46 pitch) 116" x 15"w / 92 stud holes $ 407.95

.750" x (2.52" x 54 pitch) 136" x 15"w / 108 stud holes $ 424.10

.750" x (2.52" x 56 pitch) 141" x 15"w / 112 stud holes $ 462.36

.750" x (2.52" x 62 pitch) 156" x 15"w / 124 stud holes $ 531.20

.750" x (2.52" x 60 pitch) 151" x 15"w / no stud holes $ 485.30

.750" x (2.52" x 46 pitch) 116" x 15"w / no stud holes $ 344.20

.875" x (2.52" x 48 pitch) 121" x 15"w / no stud holes $ 416.45

.750" x (2.52" x 62 pitch) 156" x 16"w / no stud holes $ 475.95

E-mail for application

______________________________________________________

VANTAGE II

*The VANTAGE II track is a direct replacement for original tracks. No modifications needed.Designed for the snowmobiler who wants added safety and superior traction on the trail.***

Waved rib across the entire width of the track for high performance traction
Improved braking
Reduce rolling resistance
Wide clip holes for improved lubrication and longer life of suspension slides
Polyester nylon reinforced

.875" x (2.52" x 48 pitch) 121" x 15"w $ 399.45

E-mail for application

____________________________________________________________

VANTAGE III

Designed for the snowmobiler who wants the safety and traction of a studded track but is uncomfortable with drilling or burning holes for studding.

Kevlar reinforced construction
Pre-molded 144 holes pattern
Excellent traction
Low rolling resistance
New Patent Pending design of premolding holes during the molding process has virtually eliminated any damage to vital cording
Also the area around the stud hole are reinforced to help prevent studs from pulling through under heavy stress
Oversized clip holes for improved lubrication and longer life of suspension slides

.750" x (2.52" x 48 pitch) 121" x 15"w / 144 stud holes $ 403.70

E-mail for application

Aggressor, Ultimate Traxtion Snowmobile Track

An astonishing improvement in deep snow capabilities, the AGGRESSOR is a new bench mark in performance standards

Profile height of .75", 1.0", 1.2"
Waved rib across the entire width of the track for high performance traction
A unique Kevlar/nylon construction
Kevlar is three times stronger pound for pound than steel
Increased flexibility for a longer life performance and a great value

poly .750" x (1.97" x 58 pitch) 114" x 15"w $ 262.60

poly .750" x (1.97" x 63 pitch) 124" x 16.5"w $ 367.12

poly 1.20" x (2.52" x 62 pitch) 156" x 20"w $ 611.10

kevlar .750" x (1.97" x 58 pitch) 114" x 15"w $ 297.45

kevlar .750" x (1.97" x 71 pitch) 139" x 16.5"w $ 338.95

kevlar 1.00" x (2.52" x 48 pitch) 121" x 15"w $ 420.70

kevlar 1.20" x (2.52" x 48 pitch) 121" x 15"w $ 471.70

kevlar .750" x (2.52" x 52 pitch) 131" x 15"w $ 254.10

kevlar 1.00" x (2.52" x 53 pitch) 133.5" x 15"w $ 464.05

kevlar 1.00" x (2.52" x 54 pich) 136" x 15"w $ 504.00

kevlar 1.20" x (2.52" x 60 pitch) 151" x 15"w $ 658.70

kevlar .750" x (3.29" x 31 pitch) 102" x 15"w $ 322.95

kevlar .750" x (3.29" x 33 pitch) 108" x 15"w $ 331.45

E-mail for application

_______________________________________________

ULTIMATE TRAXTION

Designed for the snowmobiler who wants the safety and traction of a studded track but is uncomfortable with drilling or burning holes for studding

Polyester reinforced construction
Pre-molded 144 hole pattern
Excellent traction
Low rolling resistance
Patent Pending design of premolded holes during the molding process has virtually eliminated any damage to vital cording
Also the area around the stud holes are reinforced to help prevent studs from pulling through under heavy stress
Oversized clip holes for improved lubrication and longer life of suspension slides

1.00" x (2.52" x 48 pitch) 121" x 15"w $ 420.70

E-mail for application

Visa
Discover

Durado Snowmobile Tracks

X-Force Race, Speedster Race Snowmobile Tracks

For our die hard speed buffs
Light weight and flexible, built to go fast
Can be used with or without studs, develop your own stud pattern (every pitch has premolded holes)
The speedster track is a direct replacment for original tracks. No modifications needed
New construction, made from kevlar/nylon cord
New Patent Pending design of 312 premolded holes during the molding process has virtually eliminated any damage to vital cording

RACE- .500" x (2.52" x 46 pitch) 116" x 15"w / 299 holes $ 454.70

STD- .500" x (2.52" x 48 pitch) 121" x 15"w / 312 holes $ 416.83

RACE- .500" x (2.52" x 48 pitch) 121" x 15"w / 312 holes $ 474.25

E-mail for application

Visa
Discover

______________________________________________________________

X-FORCE RACE

KIMPEX has used the latest technology available in the design of their newest snowcross track. This technology utilizes a hard compound in the center section of the track and a softer compound on the outside enabling the sled to have incredible traction and corning capabilities. It's unique profile is second to none in snowcross performance. This track is ISR approved. This new width is standard on bombardier and polaris snocross machines for 2002.

1.50" x (2.52" x 48 pitch) 121" x 14"w $ 490.40

Durado Tracks

Durado tracks are standard replacment tracks built to the same specifications as original tracks. No modification are required during installation. All durado tracks are guaranteed 1 year.

Molded, invoute drive
Molded, dual drive
Molded full rubber, involute drive
2/3 cleated, involute drive

.625" x (1.97" x 58 pitch) 114" x 15"w $ 276.25

.625" x (1.97" x 61 pitch) 120" x 15"w $ 265.15

.625" x (1.97" x 71 pitch) 139" x 15"w $ 347.60

.625" x (1.97" x 54 pitch) 106" x 15"w $ 270.25

.625" x (1.97" x 58 pitch) 114" x 18"w $ 262.60

.625" x (1.97" x 58 pitch) 114" x 15"w $ 192.05

.625" x (1.97" x 63 pitch) 124" x 15"w $ 317.85

.625" x (2.00" x 52 pitch) 104" x 15"w $ 249.00

.625" x (3.29" x 35 pitch) 115" x 15"w $ 332.77

.625" x (2.52" x 37 pitch) 93" x 15"w $ 315.30

.625" x (2.00" x 55 pitch) 110" x 15"w $ 384.15

.625" x (2.52" x 47 pitch) 119" x 15"w $ 238.80

.500" x (2.52" x 48 pitch) 121" x 15.5"w $ 332.77

.500" x (2.52" x 50 pitch) 126" x 17" $ 403.70

.500" x (2.52" x 48 pitch) 121" x 16"w $ 336.55

.500" x (2.52" x 46 pitch) 116" x 15"w $ 327.54

E-mail for application

Visa
Discover

VForce Reeds

USI Skis

PX-301 SHAPER SKI KIT

Click for product pricing and description

VX-301 SKI

Click for product pricing and description

VX-301 SKI

VX-301 AVAILABLE IN: BLACK, PURPLE, DARK BLUE, GREEN, BRIGHT RED, YELLOW, DARK RED

High Performance Mount Kits

T5 HIGH PERFORMANCE MOUNT ALSO AVAILABLE IN GOLD ANODIZED

*VX-301 W/T5 HIGH PERFORMANCE MOUNTS AND 9" CARBIDE WEAR RODS   $404.00

*VX-301 W/T5 HIGH PERFORMANCE MOUNTS AND 6" CARBIDE WEAR RODS   $396.00

*VX301 W/T5 HIGH PERFORMANCE MOUNTS AND 4" CARBIDE WEAR RODS   $388.00

"FREE SHIPPING"EXPIRES 12/31/2002

301 Ski Mount Kits

CAST ALUMINUM MOUNT ALSO AVAILABLE IN BLACK

*VX-301 W/ALUMINUM MOUNTS AND 9" CARBIDE WEAR RODS   $383.00

*VX-301 W/ALUMINUM MOUNTS AND 6" CARBIDE WEAR RODS   $375.00

*VX-301 W/ALUMINUM MOUNTS AND 4" CARBIDE WEAR RODS   $367.00

"FREE SHIPPING"EXPIRES 12/31/2002

PX-301 Sharper Ski Kit